A gazebo gives you a wide view of your surrounding area hence why many consider putting it on a paver patio. Securing a gazebo on a paver patio can be quite challenging and you also have to ensure it is properly secured to prevent accidents. Designing a paver patio sounds fairly easy but if you are going to anchor a gazebo then this requires an ultimate guide.
Before laying the patio pavers, it is vital to place a layer of bedding sand over the compacted base material. Note that the paver patio comes in different shapes, sizes, and materials in order for it to fit any outdoor space decor. The paver patio is not strongly attaching something to it is surely doable.
Yes, you can put a gazebo on a paver patio however this is depending on the type and way the patio paver has been laid. If you do have outdoor patio doors, simply attach the gazebo direct to your house by simply pacing it near the doors. You can also install an arbor, awning, and a pergola to provide some shade.
First, you have to figure out your foundation to help decide if you want it covered or uncovered before anchoring the gazebo to it. Gazebos are sometimes a hardscape design and it’s not surprising that an entire project can be based on it alone.
NEW: How Much Do Pressure Treated Boards Shrink?
Can You Put A Gazebo On Paver Patio?
There are different types of paver patio and generally, you can put a gazebo on any type of paver patio if the weight isn’t amenable to wind. All you do need is to properly secure it and you are good. Note that gazebos are massive structures since they can be built on their own and it is also dependent on the kind of bedding you have under your pavers.
To anchor your gazebo on the paver patio, you have to ensure it is secure enough to withstand high winds in your area.
The purpose of attaching a gazebo on a paver patio is not just to protect your patio but also to provide shelter from the rain but if it’s not secured, it can g flying and end up crashing into cars, homes, or people.
Some gazebos are large enough to serve as bandstands and this can be a valued garden structure but you have to be sure it is fixed on a strong paver patio. If the stone or concrete paver is weak, it can crack or pull the bolt which will result in a new gazebo hang glider.
How to Put A Gazebo on Paver Patio
How to put a gazebo on a paver patio is just as important as the material chosen. The weight of the structure of the gazebo and wind and two vital factors you should put into consideration. If you are sure your gazebo is strong and secure, below are three ways you can anchor it to a paver patio.
1. Put A Gazebo on Paver Patio Using A Drill
The process of using a drill is quite easy and reliable but keep in mind that the method will leave permanent holes in your paver. To drill a hole in your patio paver, you will need a special screw known as the tapcon or masonry screw.
These screws are designed to be used on a concrete patio so they should work for fixing the gazebo.
- Align the base of your gazebo where you want it and mark the place where you want to drill with a marker or pencil
- Ensure the drill is set at 90 degrees angle and drill directly into the paver patio
- After marking all the angles properly, remove the gazebo from the place, and to make the screw attach to the hole properly, you have to clean the insides
- Next, slide the gazebo back in place and make sure it aligns properly with the hole
- Drive the screw into the place as fast as it can go to properly secure the gazebo to the ground.
2. Anchoring Using Weights
Another easy way you can put a gazebo on a paver patio is to simply add some weights to the base of your gazebo.
This method is not only simple but won’t cause you much to maintain as the weights can be virtually anything. You can large planters, 1 for each side which makes it 4. Pour concrete inside each planter to make it heavy and sturdy.
Let the concrete dry for 48 hours and set the gazebo to stand in them. You can also add some soil and flowers to design your paver patio with it.
3. Using Concrete Footers
The last method is using concrete footers to attach the gazebo to the paver patio however this method requires being careful and it’s quite tricky as well. If you are going to use this process, you have to ensure the paver patio bedding is strong and secure.
This consists of digging a hole directly into the paver, below is how it can be done.
- First, decide the position you want your gazebo to be in, mark with chalk, and move the gazebo out of the way
- Then remove the pavers you marked with chalk, you will need a rubber mallet and flat head screwdriver to do this
- Once the pavers are removed, dig a hole at least 10 inches deep on the ground under, a regular shovel or post hole digger should do this
- Next, place the gazebo post into the holes and pour concrete into them to secure them. Level it and let it dry for 48 hours.
Can You Drill Into Concrete Pavers?
You can drill into concrete pavers but you can’t do that with any drilling tool. There is a hammer drill that is specifically designed for any type of concrete drill. Pavers can easily crack when you are drilling into them even with the right tool so you have to be extremely careful and take your time.
To drill holes in concrete pavers, take your time and start with a little then widen the hole with larger bits till you get the desired size hole you aim for. Also, mark out your hole before drilling.
Wrapping Up
While the methods listed above are relatively easy, you should consider getting a professional especially if you did not fix your paver patio yourself.
There are also ways you can put a gazebo on a paver patio without drilling any hole in it however only a professional can analyze this and tells you the best method suitable for the foundation of your paver patio.